Skip to content
Free public beta until December 4, 2026: every course is open, no card needed. After that, the first chapter of each course stays free and full access is a one-time $39 ($19 for up to 100 founding members chosen for helpful feedback). Your progress is kept. How the beta works

embedded-systems

Installing cores and compiling and uploading from the command line with arduino-cli and an FQBN

taught

Taught in

  • arduino-cli

    Embedded Systems and the Internet of Things

Requires

Required by

Local knowledge map

Local knowledge map

Explaining why firmware is cross-compiled for… Installing libraries and pinning their versions so a build i… Organizing a firmware project (src, include, lib, test) and keepin… Reading a sketch's statements, comments, braces and includes,… Telling a USB-UART bridge, native USB CDC, USB-Serial-JTAG… Tracing what runs at power-on: reset vector, startup code,… Following a sketch through preprocessor, compiler and linker t… Setting up a PlatformIO project in VS Code with pinned… Installing cores and compiling and uploading from the… Finding the board's port and fixing driver, permission an… Using the serial monitor and plotter: baud rate, line… Installing the Arduino IDE, adding a board package (core), and… Choosing a board for a project by voltage, memory, radio, USB,…

Click to expand

Solid arrows are required prerequisites; dashed are recommended or helpful. Lower rows are more foundational. Click any box to jump to that concept.